HVAC Electrical Controls & Air Distribution -
Who should take this course?
Do you work on HVAC controls and air distribution systems? Are you responsible for maintaining comfortable working or living conditions in a building? If so, this course is for you! It is also beneficial for technicians who work in multi-craft environments. You only need to work with HVAC to benefit from this course! Our past attendees for this course include building maintenance technicians (both experienced and apprentice), their supervisors, and building owners, managers and engineers working in…
…or any other facility with an HVAC system!
After completing the course, attendees will be presented with a training certificate that shows 0.8 continuing education units for each day attended (1.6 credits for 2 days), indicating that the student has learned to:
1. Identify a problem as being Electrical, Mechanical or an Air Distribution issue
2. Understand the basics of electricity as it applies to HVAC systems
3. Read HVAC ladder diagrams and wiring diagrams
4. Troubleshoot line voltage and low voltage problems
5. Properly test operating controls and safety controls
6. Troubleshoot air conditioning & heat pump systems
7. Specify the correct air handling equipment required for the job
8. Properly size HVAC air ducts
9. Determine how many CFM are needed for your system
10. Determine the air mixture condition at the cooling coil
11. Understand the benefits and disadvantages of "short cycling"
12. Control noise problems
13. Avoid air conditioning drafts
14. Test air handling equipment
Course Outline / Agenda
Day 1 - HVAC control basics, troubleshooting & testing
HVAC system problems can be divided into three major categories - Air Distribution, Electrical or Mechanical. The part that causes most service headaches is the electrical portion, and most of that can be traced back to control problems. So day 1 of this seminar concentrates on overcoming the most common service problems encountered in HVAC systems by teaching students to understand, troubleshoot and test HVAC Electrical Controls.
During this seminar, students will learn the basics of electricity including Ohm’s law and how simple series and parallel circuits are used in HVAC systems. They will learn how to troubleshoot both line voltage and low voltage in their systems. They will learn how to identify an electrical problem and determine a solution for it by testing both operating controls and safety controls. Specific situations unique to air conditioning and heat pumps will be discussed as well. Students leaving after the first day of this seminar will be confident in their HVAC electrical control knowledge and armed to go back to their workplace to immediately apply what they have learned!
- Basic Electricity & Ohm’s Law
- Meters & Tools for Taking Electrical Measurements
- Electrical Circuits
- Ladder Diagrams
- Developing Wiring Diagrams
- Control Transformer
- Starting Relay
- Defrost Timer
- High Pressure Control
- Low Pressure Control
- Oil Pressure Control
- General Troubleshooting Techniques
- Common Problem Areas
- Commercial Air Conditioning
- Heat Pump Control
- Pump Down Cycle
Day 2 - Practical Solutions for Air Distribution
Many common problems found in HVAC systems are relatively easy to correct, but are often overlooked. These problems are not electrically related at all even though many times we can get tricked into thinking they are. Yet a non-electrical problem can be as frustrating to find and fix as an electrical one, and may be even more discomforting to the people who have to live with it. So the second day of this seminar concentrates on the most often overlooked and ignored problems in HVAC systems – the "V" in "HVAC" – or ventilation, air distribution and air balancing!
We have all heard the complaints of "too hot", "too cold", "not enough air" or "I feel a draft". So in this second day of the seminar students will learn how to solve the problems that cause people to say these things. Students will learn how to handle a problem like when one area is cooling, but another is not; why 400 cfm per ton is important and why it is used; how refrigerant piping affects air conditioning performance; how to determine proper blower and duct sizes for your system; what to do when you have an undersized duct; what causes noise in a system and the tricks you can use to control it; how to troubleshoot and perform tests on air handling equipment, exhaust fans and air make-up equipment; how to properly balance an air system for ideal comfort – and so much more. The primary goal of this day is to help you minimize the complaints heard from the people working or living in your building. Once completed, students leaving this class will have all that they need to handle any complaint that may come their way.
Determining and Improving Air Flow
- 400 cfm per ton
- How many square feet per ton?
- Air mixture at the cooling coil
- Positive pressure
- Negative pressure
- Positive pressure
- Negative pressure
- Conditioning the make up air
Troubleshooting the Air Distribution System
- Temperature difference across the coil
- Balance in the system
- Short cycling
- Duct sizing
- How to use a Ductulator
What You Will Take Home
- TPC Trainco Seminar Manual - detailing all presentation material covered in the class
- Personalized Training Certificate with 0.8 TPC Trainco Continuing Education Units for each day attended (1.6 for two days), approved by the MTAA.
- All the information you need from asking our instructors specific questions about your own equipment or facility.
Optional ATMT Certification® Testing
An optional ATMT® Certification exam is available for the this training topic. It may be taken online or as a written test any time after the class is over.
Continuing Education Units (CEUs)
All students attending our seminars receive a personalized Certificate of Completion and 0.8 CEUs (Continuing Education Units) per day of training. Over 40,000 employers and government agencies who have sent their employees to our classes accept TPC Trainco CEUs for continuing education requirements. We are able to provide transcripts of all classes attended and tests taken by individual students. Please contact us if our CEUs are not yet accepted by your authority. We will initiate an application to get the approval process started.
Training class time:
7:30 am Registration
8:00am Class Begins
12:00 1:00pm Lunch (on your own)
4:30pm Class Ends